JennAir Repair Services
We exist for JennAir owners who expect more—column refrigeration that holds temp, RISE and NOIR ranges that respond instantly, wall ovens that bake precisely, and downdraft systems that keep open kitchens clear.
JennAir appliances we specialize in
Tap any line below to expand the exact JennAir platform we work on. Quick descriptions + internal links keep things tidy without extra graphics.
Column refrigerators & freezers JennAir built-in columns
Independent refrigerator + freezer towers with dedicated compressors, thermistors, and inverter boards. We protect the investment by correcting temp drift, clearing iced drain pans, swapping evaporator fans, and rehanging heavy custom panels across Southlake, Westlake, and Trophy Club.
RISE & NOIR ranges signature JennAir ranges
Dual-stacked burners, chrome-infused griddles, integrated grills, and pop-up downdraft modules need precise calibration. We rebuild ignition harnesses, track down 120V fault codes, deep-clean jet plates, and recalibrate ovens so the kitchen still feels like a JennAir showroom.
Wall & speed ovens stacked + speed oven suites
30" doubles, steam-crisp combos, and speed ovens from the RISE/NOIR line. We replace hinges, gaskets, cooling blowers, convection/steam elements, and refresh UI boards when F8E0, F2E1, or F6E4 errors pop up.
Downdraft cooktops & vents island-friendly ventilation
JennAir practically invented telescoping downdraft for open kitchens. We synchronize lift timing, replace blower motors, refresh LED touch strips, and make sure the duct run is sealed so smoke and steam stay out of sightlines.
Our advantages
1-year warranty
We back every repair with a full 1-year warranty covering both labor and OEM parts installed by our team.
Same-day, everyday service
We at AC/DC Appliance Repair value our and our clients’ time. Call us and be sure to meet our master later on the same day. Our working hours are 8 a.m to 8 p.m. seven days a week.
Our serving cities in Dallas-Fort Worth Area
- Southlake, TX
- Westlake, TX
- Colleyville, TX
- Trophy Club, TX
- Highland Village, TX
- Grapevine, TX
- Flower Mound, TX
- Coppell, TX
- Keller, TX
- Carrollton, TX
What our customers say
JennAir service investment
Our diagnostic visit is $90 and is credited toward the repair when you move forward. Labor and OEM parts for JennAir columns, RISE/NOIR ranges, wall ovens, and downdraft ventilation typically fall between $325–$950 depending on the platform and parts availability.
Although most service calls land inside that range, column sealed systems, dual-fuel ranges, and telescoping downdraft lifts add labor and OEM parts cost. Here’s how we price JennAir work across Southlake, Westlake, Colleyville, and nearby suburbs.
Service call cost
The diagnostic fee is $90. Approve the repair and we apply that visit toward the final invoice; decline it and you only owe the trip.
Factors that influence JennAir pricing
Columns, downdraft systems, and dual-fuel ovens sit at the top of the luxury category, so repairs depend on a few site-specific details.
Column sealed-system work
Twin compressors live behind custom cabinetry. When we have to evacuate refrigerant, pull a vacuum, and recharge with R600a or R134a, the labor pushes toward the upper end of the range and sometimes requires a return visit to monitor temperatures.
Range fuel type & modules
RISE and NOIR ranges combine gas cooktops with electric ovens, chrome griddles, and sometimes built-in downdraft lifts. Replacing ignition harnesses or control boards on those platforms takes longer than swapping a basic burner or bake element.
Flush installations
Many JennAir suites sit flush with stone or inset in furniture panels. If we need to remove trim, shrouds, or island panels to reach a control board, we budget extra time to keep the millwork pristine.
What to choose: DIY vs. hire an appliance repair tech?
Be careful working with electrical, plumbing or fuel connections. Putting yourself or your family in danger isn’t worth the money savings, especially when you’re dealing with chrome grates, dual-stack burners, or column sealed systems. If you need to replace a compressor, hinge kit, or induction module, call AC/DC – we’ll keep the luxury finish intact while restoring performance.
List of services on this page
Column refrigeration rescue
JennAir column pairs rely on independent compressors, evaporators, and smart sensors to hold 34–38 °F in the fridge tower and sub-zero temps in the freezer. We stock inverter boards, evaporator fan motors, and door gaskets so columns in Southlake, Westlake, and Trophy Club get same-day attention.
Typical service calls
- High-temp alarms or drifting temperatures after a power surge
- Evaporator frost build-up from failed thermistors or clogged drains
- Column door sagging so panels rub the cabinetry
- Ice and water modules that stopped dispensing or began leaking
- Compressor inverter fault codes and control board reboots
JennAir models we see every week
- RISE 30" Refrigerator Column
- RISE 30" Freezer Column
- NOIR 36" Refrigerator Column
- NOIR 24" Freezer Column
- Panel-ready double column suites
- Undercounter beverage centers
Whether the problem is cosmetic or sealed-system related, we pressure test, pull vacuum, and recharge with the exact refrigerant spec JennAir calls for.
RISE & NOIR range repair
Dual-stacked burners, grills, griddles, and chrome-infused grates demand techs who understand JennAir calibration. We rebuild gas manifolds, replace ignition harnesses, and re-season griddles so dinner service stays on schedule.
Issues we solve fast
- Simmer flames that flicker out because of clogged ports or low manifold pressure
- 120V errors on dual-fuel ovens after a control relay shorts
- Motorized grill and downdraft modules that no longer rise smoothly
- Touchscreen or Wi-Fi modules freezing mid-cycle
- Oven temperatures overshooting or lagging 30 °F from setpoint
What affects range repair cost?
Expect most JennAir range jobs to land between $425–$950. Chrome grates, downdraft lifts, and dual-fuel control boards raise the parts spend, while straightforward burner cleaning often stays on the low end.
JennAir wall & speed ovens
From 30" double wall ovens with V2 convection to stacked speed oven combos, we recalibrate probes, replace blower assemblies, and refresh seals so baking, roasting, and proofing stay precise.
Common problems
- Broil or convection elements that no longer glow even though breakers are good
- Stuck doors after a failed self-clean cycle
- Cooling fan noise or vibration telegraphing through custom cabinets
- Steam-crisp cycles that stop early because the reservoir sensor failed
- Error codes F8E0, F2E1, or F6E4 triggered by user interface boards
Why homeowners call us
We carry OEM hinges, gaskets, relay boards, and temp sensors in the van, so most JennAir wall oven repairs wrap in a single visit across Flower Mound, Coppell, and Highland Village.
Downdraft ventilation & cooktops
JennAir practically invented telescoping downdraft for island kitchens. We keep blowers, grease filters, LED touch strips, and lift motors in stock so your open concept stays smoke-free.
Typical repairs
- Downdraft canopy stuck halfway up because of worn gears
- Ventilators running but pulling weak CFM because the plenum is clogged
- Glass cooktops with cracked zones or unresponsive touch sliders
- Induction modules throwing 7E/8E error codes
Keep the suite coordinated
We test downdraft lift timing with adjacent cooktops, confirm duct boots are sealed, and verify make-up air so JennAir ventilation stays whisper quiet in Grapevine, Keller, and Colleyville homes.